P. (06) 835 4499 | E. email@example.com
PICK UP AND DELIVERY OVER THE NORTH ISLAND
Below is a map with the basic routes that our trucks follow. We can work to accommodate your transportation needs if your location does not fall under these free pickup and delivery runs.
We essentially have three truck runs from Napier:
STUB AND THREAD PROTECTION
We offer taping of items to avoid zinc coating on specific items. These items may include threads or axle stubs.
STRIP AND RE-GALVANISING
To revitalise your galvanised item, we offer a stripping and redipping process. This removes old zinc and allows us to recoat it with fresh zinc.
ACID OR CAUSTIC CLEANING
We can also offer our baths for cleaning or metal pickling only, removing the item from the process prior to zinc dipping.
BRUSHING OF THREADS
If you have threads that require zinc coating but need to be clean enough for the threads to work correctly, we can brush the threads while the zinc is still molten. This leaves adequate zinc to prevent rust while leaving the thread clean.
DRILLING - FOR STEEL PREPARATION
If you are unsure on best hole placement, feel free to either talk to our staff or leave the drilling completely in our hands.
SPINNING - SMALL ITEMS
Galvanising HB operates a spinner, with this we can process small items in our bath, then spin-off the excess zinc leaving things such as bolt threads clean.
GALVANISING TO VARIOUS STANDARDS
All galvanising done at our plant is processed to the AS/NZS 4680 standard. However if you require a different standard such as HDG900 or another international standard, we are happy to help out.
GALVANISING HB LTD ©2012 | 41 THAMES ST, PANDORA, NAPIER, NEW ZEALAND | P. +64 6 835 4499 | F. +64 6 835 9499 | Freephone. 0800 TOGALV | Email